Table of Contents

• What a Eurocraft Automotive Pre-Purchase Inspection Covers
• How Our Report Is Organized, Section by Section
• Reading Engine, Transmission and Cooling System Findings
• Brakes, Suspension, Steering and Wheel Alignment on Your Report
• Electrical, Diagnostic and Module Findings in a Used European Car
• How Long a Pre-Purchase Inspection Takes at Eurocraft Automotive
• Questions to Ask When You Review Your Used Car Inspection Report
• Book Your Pre-Purchase Inspection in Orlando
• Frequently Asked Questions

How to Read a Eurocraft Automotive Pre-Purchase Report

What a Eurocraft Automotive Pre-Purchase Inspection Covers

Buying a used European car in Orlando is exciting, but it can also be risky. A pre-purchase inspection from Eurocraft Automotive gives you a clear, written picture of the car’s condition before you sign anything, and our pre-purchase inspection report is the document that captures it. Our diagnostic scanning pulls fault codes from each module so the report reflects what the car’s systems are actually recording. This guide walks you through our report, section by section, so you know exactly what you are reading.

We bring more than 40 years in the trade, with training that comes from the European manufacturers and their dealer programs, and we use genuine factory diagnostic software for BMW, Mercedes-Benz, Audi, Volkswagen and Porsche. That means the fault codes and system data in your report come from the same tools the factories use, not generic scan tools.

We review engine, transmission, cooling, brakes, suspension, steering, electrical systems and tires. The result is a pre-purchase inspection report written in plain language that you can use to make a confident decision.

How Our Report Is Organized, Section by Section

Each section lists what we found and notes what we recommend.

• Vehicle information: year, make, model, mileage, and VIN
• Diagnostic scan results: stored and pending fault codes from each module
• Engine and transmission: leaks, noises, and operating condition
• Cooling and fluids: coolant, oil, and other fluid condition
• Brakes, suspension and steering: wear and safety-related findings
• Electrical and modules: battery, charging, and electronic system checks
• Tires and alignment: tread depth, wear pattern, and alignment readings
• Summary and recommendations: priority items ranked by urgency

Here is a quick reference to the sections of our pre-purchase inspection report and what each one covers.

Reading Engine, Transmission and Cooling System Findings

We check for oil leaks, unusual noises, and how the engine runs during a test drive.

Transmission findings show how smoothly the car shifts and whether fluid levels and condition are normal. Look for notes about hesitation, harsh shifts, or fluid that looks dark or burnt. These are worth discussing before you buy. If your report flags engine symptoms, our guide to timing chain failure symptoms explains what those findings can mean.

We check cooling-system condition as part of the inspection.

Brakes, Suspension, Steering and Wheel Alignment on Your Report

Brakes are a safety item, so we measure pad thickness and check rotor condition. Your report will list each wheel separately, so you can see whether wear is even. Uneven wear often points to a caliper or suspension issue.

We check suspension and steering condition as part of the inspection.

Wheel alignment deserves special attention: tire wear patterns and alignment readings can show whether the car was driven hard or hit something.

Electrical, Diagnostic and Module Findings in a Used European Car

European cars rely heavily on electronics, so this section matters. We perform diagnostic scanning and review the fault codes we find.

Our diagnostics work uses factory-level tools for BMW, Mercedes-Benz, Audi/VW and Porsche to pinpoint the cause.

How Long a Pre-Purchase Inspection Takes at Eurocraft Automotive

Inspection time depends on the vehicle, and we will give you a time frame when you book. When it is done, we walk you through the findings by phone or in person, so the written report is never a surprise.

Questions to Ask When You Review Your Used Car Inspection Report

When you read the report, a few questions help you make the right choice:

• Are any findings marked as safety-related, and do they need repair before driving?
• Which items are urgent, and which can wait for routine service?
• Are the fault codes active or only stored in memory?
• What would the repairs roughly involve, and which ones are optional?
• Does the alignment or tire wear suggest the car was driven hard or hit something?

If anything in your report is unclear, call us at 407-512-5877.

Book Your Pre-Purchase Inspection in Orlando

A clear, detailed report protects you before you spend money on a used European car. At Eurocraft Automotive, we inspect every vehicle with factory-level tools and explain each finding in plain language. Whether you are buying a BMW, Mercedes-Benz, Audi, Volkswagen, Porsche, MINI, Land Rover, Sprinter, Alfa Romeo or another European or exotic vehicle, we can give you a complete picture of its condition.

Our shop is open Monday through Friday, 9 a.m. to 6 p.m. Call 407-512-5877 or book an appointment at eurocraftautomotive.com/appointment/ to schedule a time that works for you. We look forward to helping you buy with confidence.

Book an Appointment →

Add eurocraftautomotive.com as a preferred source on Google →